Safety mat switch sensor

Product Item：PSM4

Cable: 4 cores * 0.32² * 3m shielded cable (can be customized to be extended, 2 cores can be customized)
Complies with: EN ISO 13849-1 (PLd/Safety Category 3) and EN ISO 13856-1
Controller: Can be used with SRC106 safety mat controller
Trigger force: >30kg
Applicable environment: factory
Mat: 14mm thickness, hard board, durable and long life
Material: Normally black EPDM rubber, yellow is PVC, red is PVC
For more details, please refer to the product manual

Product Detail
FAQs

Industrial Safety System

Safety Mat and Safety Controller

Download Safety Mat Brochure

For more details, please add WhatsApp consultation: +8618922155361

safety cushion mat is a protection device to protect people

Features:

1. Any rectangular size can be assembled, or special-shaped or round shapes, please confirm with drawings

2. Have safety level certification

3. Use in combination with safety mat controller

Model specifications

PSM4 - A * B - C D E F - G - H

	A	B	C	D	E	F	G	H
Model	Width	Length	Number of splicing	Size Description	Color/Material Configuration	Resistor Configuration	Cable length	Controller
PSM4 Default	L2:Safety pad width	L1: safety pad length	1：Not writing	A: After installing the outer frame	B: Black rubber surface (default)	K: 4-core cable (default)	3m: Standard configuration. Not writing (default)	SRC: safety relay
PSM6			2: Splice 2 pieces	F: Net carpet size, additional frame required	Y: Yellow PVC (pattern)	KF: 2 sets of 2 cores	6m: 6 meters cable
PSM11			3: Splice 3 pieces	P: Net carpet size, without outer frame	H: Red PVC (pattern)	R: With terminal resistor (8.2KΩ)	8m: 8 meters cable
			4: Splice 4 pieces	S: Customized type

For example:

PSM4-1000*500-ABK-SRC

Technical parameters - 14mm thick hard mat, total size including outer frame installation is 1000*500 (mm), length and width each add 90mm (excluding 15mm stuck in the mat), clean mat is 910*410 (mm), black rubber surface, K-type 4-core cable, 3 meters; equipped with a safety relay

PSM4-2000*1000-2FHR-8m-SRC

Safety mat
Adapt to detection range	It is suitable for inspection personnel in general working conditions and cannot withstand vehicle crushing and heavy object impact.
Recommended use occasions	Suitable for safety protection in personnel operating areas; PSM4 - regular model, the hard board is more wear-resistant and durable, and is suitable for one side larger than 400mm (the default is PSM4 without instructions); PSM6 - Soft pad, more responsive, non-bendable, suitable for small sizes; PSM11 - soft padded, thinner, non-bendable, height restricted for narrow locations;
Applicable industries	Paper industry, electronics industry, automobile welding production lines, forging production lines, general industrial applications and automatic palletizers and other light and heavy industrial applications
Dimensions (net mat)	Customized width range: 200mm-1000mm Customized length range: 200mm-2000mm				Surface Material-PSM4	PSM4-rubber (black particles for anti-skid) or PVC (red and yellow patterns for anti-skid);
Edge sealing form	Yellow aluminum edge sealing				Surface material-PSM6, PSM11	Hard sole
Maximum allowable load (8 hours)	≤ 400N/cm2				Mechanical life PSM4	＞1，000,000
Maximum humidity (23 degrees)	95% (condensation)				Mechanical life PSM6	＞800,000
Ambient temperature (usage environment)	-5℃ to 55℃ (no icing or condensation)				Mechanical life PSM11	＞700,000
Ambient temperature (storage environment)	-10℃ to 60℃				Cable	4-core*0.32² shielded cable, 3M standard (can be customized and lengthened)
Triggering force	PSM4-Adult 30KG		PSM6/11-Adult 20KG		Output type	2NO(passive normally open)
Protection level	IP65				Series connection	Series connection of less than 5/6 blocks is allowed (or no more than 4-5 square meters)
Thickness	PSM4-14mm	PSM6-15mm		PSM11-11mm	Controller maximum voltage	DC24V (using 0V control)
Response time	＜30ms				Switching current\voltage	Max.100mA \5V
Weight	About 20kg/m²				Allowed single block area	1.5m²
Conform to Standard application	The non-isolated safety protection system composed of safety mat and SRC106 safety relay meets the following standards.EN1760-1 ISO13856-2 EN62061 EN ISO13849-1 EN60204-1 EN/IEC 61496-1

When purchasing safety mat switch sensors, choosing high-quality products will undoubtedly bring many advantages to the company.

Purchasing safety mat switch sensors is not only a strong guarantee for the safety of equipment, but also a deep concern for the life safety of workers. This type of sensor occupies a pivotal position in the field of modern industrial automation with its excellent performance and unique design.

Self-diagnosis function: Cyndar's safety mat switch sensor also has a self-diagnosis function, which can monitor its own working status in real time and automatically alarm when potential problems are found. The output disconnect signal controller equipment stops working. This function greatly improves the maintainability and reliability of the equipment.

Q: When will you arrange the production?
A: We usually arrange the production immediately after receiving your payment if we have the item in stock. Otherwise, please confirm with us for lead time.

Q: What is your accepted payment type?
A: Wire transfer, Paypal and Western Union, and Alibaba Trade Assurance.We only accept Paypal and Western Union, and Alibaba Trade Assurance for payment amounts below USD400.

Q: What logistic forwarder do you usually work with?
A: We work with EMS, TNT, UPS, FEDEX and other logistric forwarders. Assigned your own forwarder for shipment is available.

Q: What if the Wireless Charging Bundle is not charging my device(s)?
A: 1. Check to ensure that your device is Qi-compliant.
2. Check to ensure that the AC adapter you’re using with the Wireless Charging Bundle has an output of 2A or more.
3. Check to ensure that you are placing your phone on the center of Wireless Charging Bundle.
4. Check to ensure the phone is not in a 5mm or thicker case when charging.
5. Check to ensure there is no metal obstruction on the back of the phone/phone case, or credit cards inside the case.
6. The Wireless Charging Bundle’s cable may be faulty. Try using a different cable.
7. Restart your phone. If the problem persists, please email us at support@anker.com to claim your 18-month warranty. Request sent to owner.

Q: How does the Wireless Charging Bundle charging speed compare to a traditional wired charger?
A: It depends on your device, but wireless charging generally charges at a slower rate.

Q: What is the Wireless Charging Bundle charging speed?
A: Charging speed varies depending on the device. You can expect a maximum charge current of 1A.

Q: What kind of AC adapter should I use with Wireless Charging Bundle?
A: Make sure that the AC adapter that you use has a minimum output of 2A, otherwise your devices may not charge properly.

Q: Can I use a different USB cable instead of the cable that comes with Wireless Charging Bundle?
A: Yes, other Micro USB cables can be used, but to ensure the utmost safety and performance, we strongly recommend using your device’s original cable (OEM) to charge your devices with the Wireless Charging Bundle.

Q: What does Wireless Charging Bundle’s LED indicator show while charging?
A: When the charging pad is powered up, you pick up your phone during charging, or your phone is fully charged, the LED indicator will display blue for 3 seconds before turning off. While your phone is charging, the LED will display a steady blue. If your phone is not charging normally or the temperature is too high, the LED will flash blue. Request sent to owner.

Q: Is radiation from wireless chargers harmful to one’s health?
A: The PowerPort Wireless 5 Pad only emits non-ionizing radiation which is not harmful to humans. What’s more, it’s certified with FCC, CE, RoHS, etc.

Q: Does wireless charging affect other wireless devices?
A: No. Wireless chargers use frequencies between 110-205kHz, which are in a different range than most wireless devices. What’s more, it’s certified with FCC, CE, RoHS, etc.

Q: Does this charger produce excessive heat?
A: When in use, this charger’s temperature should not exceed 104°F/40°C.

...